Full carbon fiber tube with Al re-inforcement for the upper 29mm.
This patented construction provides extra tensile strength at a super low weight.
MatriX is the manufacture process for melding aluminum or alloy with carbon fiber.
It allows our components to take advantage of the strengths of both materials. Carbon fiber is light and strong
and alloy is heavy but flexible, so in matriX we get the best of both material's properties.
Suitable for XC and Road usage. Not suitable for aggressive mountain biking. This seatpost is a precision item which has been
manufactured to an extremely high tolerances. Please ensure your frame seat tube is chamfered to avoid damage to the post, especially on Al
frame seat tubes. Also ensure the inside diameter of the frame seat tube is large enough to accept this post. Use of double seat clamp is
recommended to spread the clamping area load. See CC-C0331 for 31.8/27.2, and CC-C0334 for 34.9/31.6. A shim may be used in conjunction with
the post on Road bikes to achieve the desired outer diameter, but shims are not recommended for MTB usage. Please order the correct length, and
note that in addition to our general terms and conditions, returns/exchanges will be subject to a GBP 10/USD 15, or currency equivalent, re-stocking charge.
Length measured from the bottom of the post to the center line of the seat rails